Depending on the production area, some businesses require temperatures three times higher than the boiling point of water during their activities. Using existing water boilers at such high pressures is not preferred because it requires high costs and is dangerous for the safety of the working environment. Oil boilers are therefore used to obtain heat energy at temperatures of at least three hundred degrees. In this way, an efficient and safe working opportunity is created. Hot oil boilers are more suitable in order to obtain high pressure at high temperatures which cannot be reached by fluids such as boiling water and steam. Thermal boilers are used in these boilers. These oils do not lose their physical and chemical properties even at very high temperatures. In addition, hot oil boilers are more economical than water vapor systems which reduce the efficiency such as lime bonding and corrosion and frequently cause problems as in water steam systems.
Hot oil boilers used in industry and enterprises reach high temperatures that water and steam cannot reach. Hot oil boilers used to reach 300 degrees and high temperatures are dangerous boilers. These boilers which can be placed horizontally and vertically can work under low pressure at high temperatures.
Hot oil boilers; It is used in many sectors such as paint, chemical, packaging, food, oil, leather. These boilers are employees with gasoline, diesel and natural gas. Hot oil boilers produced in different sizes and according to the fuel options according to the sector must be maintained and controlled as they operate at high temperatures. Periodically controlled hot oil boiler prevents accidents that may occur before. Maintenance and inspections are legally required by law. Hot oil boilers are subject to the sağlık Health and safety requirements for the use of work equipment ğince in accordance with the law numbered 6331.
Türcert helps you to prevent any dangerous event and meet your legal requirements by reporting deficiencies, nonconformities or dangerous situations as a result of the hot oil boilers controls it performs with its expert team and equipment.
However, if used too much waste can be mixed into the thermal oil and the heat transfer capacity and heat transfer capacity of the oil starts to decrease. In addition, waste mixed with oil is harmful to the installation. Air must not be mixed with thermal oil. When the temperature of the oil comes in contact with air when the temperature exceeds 60, oxidation starts, the viscosity of the oil rises and the viscosity decreases.
On the other hand, in general, all boilers using pressure are at risk. Hot oil boilers and installations must be checked and inspected at least once a year by mechanical engineers, machine technicians or high technicians. This is a legal requirement stipulated by the Regulation on Health and Safety in the Use of Work Equipment.
Our company carries out periodic inspections and inspections of hot oil boilers within the scope of regular controls of pressure vessels in accordance with the standards published by domestic and foreign organizations. A few standards considered in these studies are:
- TS 2025 Steam boilers operating - General rules of inspection and maintenance
- TS EN 13445-1 / A1 Pressure receptacles - Non-contact with fire - Part 1: General
- TS EN 13445-5 Pressure receptacles - Non-contact - Section 5: Inspection and testing
