Teleski is the most commonly used machine in skiing centers. A skier goes up again by clinging to the machine because it is very difficult to climb up again and does not waste time and get tired. The first ropeway technique in history was used in the transportation of the necessary materials for construction during the Great Wall of China in 250 BC. If you are a good skier you can use the ski lift comfortably. The safety of these machines is also very important. No matter how good a skier you are, it can cause death and loss in any failure. If you want to avoid any malfunctions in your machine, it is best to have a periodic check.
Ski lifts are generally used for short distances in ski resorts. As with ski lifts, there is a risk of collision with skiers sliding on the track, since the skiers are carried on the track before they reach a certain height. It is also a risk to stay under the rear skier in the event of a fall from the telescope. Ski lifts that do not carry such risks are more preferred by ski centers than ski lifts.
The ski lifts used in ski centers generally provide comfortable and secure seating and carry skiers up to a certain height. Some chairlift types are also cabins. They are also available in low-speed or high-speed versions, or with a capacity of two to eight people. The longest chairlift line in our country is in Uludağ and its length is three thousand meters.
According to the Regulation on Health and Safety Conditions in the Use of Work Equipment issued by the Ministry of Labor and Social Security, chairlift and chairlift systems should be checked at least once a year. These systems must have at least the 1,25 floor of the declared load and have braking systems to stop and load quickly in case of danger, unless otherwise stipulated in the relevant standards.
We prepare reports and documents that report the deficiencies detected by checking that the relevant equipment and auxiliary equipment can safely perform the lifting work, which we perform with our expert state-of-the-art team and equipment, and that the equipment meets the test requirements.
