Pressure boosters are automatically operated pressurization systems that take the water at normal pressure from the network or from a certain tank and offer it at the required pressure and flow rate. It is possible to classify the hydrophores, which are used for various purposes and which have different characteristics, as domestic water booster, garden irrigation booster or fire fighting water booster. According to the structural features of the booster stainless steel body, vertical type, horizontal type, bronze wheel or tank top can be classified as. It is also possible to classify it as single-pump or multi-pump.
In terms of occupational health and safety in enterprises, for the safe use of pressure equipment together with safety equipment, these pressure equipment periodically corrosion, sealing, abrasion, cracks, deformation, connection control, temperature, pressure, cleaning, function testing and control criteria such as need to be.
Turcert Inspection, in accordance with the teknik Occupational Health and Safety Law X no. It carries out annual periodic inspections of booster tanks and all pressure equipments in accordance with TS EN ISO / IEC 6331 standard.
The standard generally accepted in Europe is the DIN 1988 standard, which describes in detail the basic pressurization systems. The DIN 1988-5 standard describes how and under which conditions the domestic water booster can be selected and used. In the European Union countries the EN 806 standard applies, but in some cases references are also made to the DIN 1988 standard.
The first condition for the long and healthy operation of the booster is the selection according to the appropriate operating and environmental conditions and the correct determination of the pump capacity. The second condition is that it is checked and inspected at least once a year by mechanical engineers, machine technicians or high technicians. This obligation is a legal obligation stipulated by the Regulation on Health and Safety Conditions in the Use of Work Equipment.
When examining the pressure distribution in the general installation, it is important to note that the static water pressure does not exceed the 5 bar at any point in the installation. According to the standards, in order to ensure safe water use, if the inlet pressure exceeds the 5 bar, it is necessary to use a pressure reducer or to perform regional pressurization in the installation.
