Dozer; The work machine with a steel plate on the front for lowering and lifting is called a dozer. Dozer rubble does the job of dragging the soil from the area where it is located to the desired area by dragging it forward. There are several types with dozer knurled iron legs and rubberized legs. These machines, which are in different sizes according to their usage areas, are generally used in the construction sector, excavation works and road opening in different sectors. Since dozers do heavy work, they should not cause any malfunction during operation. In order to prevent accidents, their maintenance and periodic checks should be made. Controls made by notified bodies reduce the accident risk of dozers to zero. Periodic controls should be carried out to ensure both occupational health and safety.Periodic controls of the dozers are subject to the Sağlık Regulation on Health and Safety Conditions in the Use of Work Equipment ”. The controls to be carried out must be carried out in accordance with this regulation. Because the standards and criteria in this regulation are European standards. If you want to have your dozers periodically inspected, İmka will check that the equipment and auxiliary equipment can safely carry out the lifting work, the equipment meets the test requirements, and the detected deficiencies, non-conformities or dangerous situations are reports about.
In general, dozers are road construction, land cleaning, material spreading, leveling, ditch filling, rock removal or soil loosening work machines. Dozers are used for various purposes in the construction of dwellings, dwellings, dams, forests and mining. Mainly used in transportation works by dragging soil or construction waste in a short distance. Dozers have 700 horsepower and 80 ton weight lifting capacities. There are various types of pallets according to pallet shapes, power transmission and blade positions. Different pallet characteristics may be needed depending on the job. Straight tracked dozers are generally more efficient on loose ground, while triangular tracked dozers are more efficient in deep pits. Dozers do not have high maneuvering speeds, but they have high maneuverability in confined spaces. Some dozers are also used as tow trucks. Doing the debris, dragging the soil from the region where the snow is located to the desired region and moving it forward. Dozers are available with ribbed iron legs and rubberized legs. These machines are of different sizes according to their usage areas and are generally used in construction sector, excavation works and different sectors of road opening.
Dozers should not cause any malfunctions during operation because they do heavy work. Maintenance and periodic checks must be made in order not to cause accidents. Periodic checks of the dossiers are subject to the Regulation on Health and Safety Conditions in the Use of Work Equipment. The controls to be carried out must be carried out in accordance with this regulation. Because the standards and criteria in this regulation are European standards. Regulation on Health and Safety Conditions in the Use of Work Equipment To determine the minimum requirements for health and safety in the use of work equipment in the workplace. It covers all workplaces covered by the Occupational Health and Safety Law dated 20 / 6 / 2012 and numbered 6331. Duties based on Articles 6331 and 30 of the Law on Duties and prepared in parallel with the European Union Directive 31 / 9 / EC dated 1 / 1985 / 3146Attractive dozer periodic inspection Make sure that the persons performing the tests and inspections are not the designer, supplier, installer, seller, owner, user, maintainer or authorized representative of these groups of the equipment they inspect in terms of independence, impartiality and reliability, and that the inspection bodies are accredited.
Lifting and conveying equipment
2.2.1. Unless otherwise specified in the standards, lifting and conveying equipment shall be capable of effectively and safely lifting and suspending at least the 1,25 of the declared load, and shall have such load-resistant and sufficient load brakes.
2.2.2. Periodic inspections of lifting and conveying equipment are carried out by mechanical engineers, technical teachers graduated from the department of mechanical or metal education, or machine technicians or technicians. If non-destructive testing methods are used in such periodic checks, these methods may only be applied by engineers, technical teachers, technicians or technicians trained in accordance with TS EN ISO 9712 standard.
However, for whatever purpose, dozers are motor vehicles and periodical checks and inspections are required for healthy and safe use within the scope of construction machinery.
The Regulation on Health and Safety Conditions in the Use of Work Equipment includes the minimum requirements for the health and safety of the construction machinery and equipment used in the workplace. Details of the Annex to this Regulation, Maintenance, Repair and Periodic Inspection (Annex 3) are provided. In any case, however, regular inspections of towing dozers are required at least once a year.
Our company performs regular inspections and inspections of the tractors within the framework of periodic controls of the construction machines in accordance with the relevant legal regulations, standards and test methods published by domestic and foreign organizations. A few standards are based on:
- TS 1230-2 ISO 7129 Construction excavators - Inserts for hammer dozers, graders and scrapers - Main shapes and basic dimensions
- TS EN 474-1 + A4 Construction and excavation machinery - Safety - Part 1: General features
- TS EN 474-2 + A1 Construction and excavation machinery - Safety - Part 2: Features for tractor dozers
- TS 10278 ISO 6747 Construction and Excavating Machinery - Tractor Dozers - Terms and Commercial Properties
